Climbing
Grab Bag
Home
Climbing Walls
Camalots
Castle Rock
Web-o-lette
climer
Rap Backups
What Knots?
SoloAid
Links
Attaching a SoloAid to your harnessI attach the SoloAid to my harness using one 12" Blue Water 27kN sewn spectra runner. I prerig this by threading the end without the seam (B) through the small hole at the bottom of the SoloAid so that a short loop sticks out.Step #1: To attach the SoloAid to my harness, I take end (A) of the runner and pass it through my waist and leg loops. I then thread end (A) back through the short loop (B).  |
Step #2:
I now pass the loop of end (A) over the whole SoloAid assembly.
 Step #3: The finished knot is compact and secure. It also is simple to tie and untie. Lastly, it keeps the SoloAid close to your center of gravity.  WARNING: When rappelling, do NOT let the rope run over the sling. |
DISCLAIMER: Climbing is inherently dangerous and may result in death or serious injury.